点击图片查看大图
提示信息'
产品介绍：
脱模剂有防锈及润模的作用可延长模具使用寿命。
多使用哥顿脱模剂有助于维持生产效率. 使用简单且脱模时间短，效果佳。
使用方法：
1.每次用清模剂洗模后，便可用哥顿脱模剂去润滑模盒，使用时应距离模盒
约半公尺，然后喷上脱模剂在模面上
Material Compatability
| Material | #909C" SOLVENT BASED NON-FLAMMABLE (Green Label) | #808 "Aqueous" WATER BASED NON-FLAMMABLE (Blue Label) | #909 "D" SOLVENT BASED NON-FLAMMABLE (Red Label) | |||
| Tensile Strength | Maximum Displacement | Tensile Strength | Maximum Displacement | Tensile Strength | Maximum Displacement | |
| ABS | A | A | A | A | A | A |
| Acetal | A | A | A | A | A | A |
| Acrylic | B | C | A | C | C | C |
| Epoxy | A | A | A | A | A | A |
| PEI | A | B | A | B | A | B |
| PET | A | A | A | A | A | A |
| Polycarbonate | A | C | C | C | A | C |
| Polethylene | A | B | A | A | B | A |
| Polypropylene | A | C | A | C | A | C |
| PPO | A | C | A | C | B | C |
| PPS | A | A | A | A | A | A |
| SBR Rubber | A | C | A | C | A | B |
| *A - Material Property Retention of 90-100+% ..........Highly Compatible *B - Material Property Retention of 80-89+% ............Moderately Compatible *C - Material Property Retention of Less than 80% ...Not Compatible 1. The products herein are for industrial use only; suggestions for use are made without warranty expressed or implied 2. These data are intended as a guide; specific applicability must be ascertained through product testing within particular manufacturing conditions and parameters. 3. Prior to use ALL LABEL WARNINGS as well as those within the Material Safety Data Sheet (M.S.D.S.) must be read and understood. 4. The testing was completed at an independent ISO certified laboratory. 5. Additional Test Data as well as methodology available upon request. |
2.使用次数及份量视乎塑封料及模具本身的需要而定。
