深圳市会商洛富哲电子有限公司

LINKSYS PAP2 设置说明书
首先，把PAP2设备用网线接在路由器上，电话机也接上PAP2设备，并接好电源。
PAP2设备起动后，按电话机的：****（四个米字键）直到电话在英语报音提示。然后，按：110#，电话会报出这个PAP2设备在路由器上分配的地址。当然每个设备分配的地址不同的，，注意听电话提示音。例如：PAP2在路由器上分配的IP是：192.168.1.102 ，打开IE，在地址中输入：192.168.1.102 回车，会出现如下界面.

然后，找到管理入口， admin login。单击左键，找开如下界面。设置Line 1电话机（line 2就是第二个电话机，与设备上的phone 1和phone 2相对应，第二个电话机的设置方法与第一个电话机相同），填按下图示，填好服务器的IP地址（这个由网络电话服务商提供）。填好你的帐号和密码。保存设置就行了。。。PAP2就可以打电话了。。

 思科网关使用方法：
1.宽带网+路由器+思科网关+普通电话机＝节省国内、国际长途话费或免费全球通话。
2.宽带网+路由器+思科网关＋电话程控交换机+普通电话机＝节省国内、国际长途话费或免费全球通话。
思科双口网关有传真功能。支持SIP协议

Linksys PAP2  Vbuzzer 服务设置方法

Linksys PAP2 Vbuzzer 设置方法

设置：
1，上面3个黄色的框照填就行
2，Display Name: zhansan （你的显示名字）
User ID: zhansan （你的登陆用户名）
Password:**** （你的密码）

Linksys PAP2

Hello Everybody,

With this post, we are trying to provide step-by-step guides for any Linksys PAP2 users to configure or re-configure the device to work with Vbuzzer.

Step 1.Connect the Linksys PAP2 to an Internet connection by the following pictures.

Plug an analog telephone into the “Phone 1” port

Plug the Ethernet cable into the Ethernet port of the Linksys PAP2 in order to connect it to a router or an Internet connection.

Connect the power cord to the Linksys PAP2.

Step2. Set the Linksys PAP2 to the factory default configuration.

If you ONLY want to change some items of setting, please skip this step.

Pick up the phone attached to the Linksys.

Dial****73738#

Press1to confirm

Hang up the phone

Step3. Obtain an IP address of the Linksys PAP2

Enable DHCP to acquire an IP address automatically

Pick up the phone attached to the Linksys

Dial****

Press101#after you hear “Linksys configuration menu.”

Press1#to enable DHCP

Hang up the phone and wait a while.

Obtain a valid IP address of the Linksys PAP2.

Pick up the phone attached to the Linksys PAP2

Dial****

Press110#after you hear “Linksys configuration menu”

The Linksys will read back an IP address of the PAP2. If this IP address is valid, you can immediately go to Step 5. Otherwise, you need to take the following Step C.

If the IP address of the PAP2 is 0.0.0.0, please take the following actions.

Hang up the phone, unplug and replug the PAP2 power cord to reboot.

Wait a few minutes, then check the IP address again by Step B

If the IP address is still invalid, please check the following aspects.

The DHCP server does not assign an IP address to the PAP2. Please configure the DHCP server.

The network does not have a DHCP server. Please configure a static IP address manually by Step 4.

Step 4. Configure a static IP address manually

If the Linksys PAP2 can not acquire a valid IP address automatically, it is necessary to configure a static IP address manually.

Obtain an IP address, a default gateway and a subnet mask

Pick up the phone connected to the Linksys.

Dial****

Press101#after you hear “Linksys configuration menu”

Press0#to disable DHCP.

Press1to save the setting.

Press111#to access the IP address Menu

Input the static IP address followed by # and use * to indicate a period (.). For example, the IP address is 192.168.1.135 would be 192*168*1*135#.

Press1to save the setting.

Press131#to access the default gateway menu.

Enter the default gateway followed by # and use * to indicate a period (.).

Press1to save the setting.

Press121#to access the subnet mask menu

Enter the subnet mask followed by # and use * to indicate a period (.).

Press1to save the setting.

Finally, please verify the IP address of Linksys is valid by Step 3.

Step 5. Set the configuration of the Linksys

Open the configuration page by typing the following link into your web browser:

http://IP_address/where IP_address is the IP address of the Linksys PAP2.

Click on “Admin Login” and then click on “Switch to advanced view”.

Click on the “Line 1” tab link. A configuration will be displayed. Fill in the highlighted fields. Please do not modify other default values.

Click on the “User 1” tab link. Another configuration will be displayed. Please fill in the highlighted fields and do not touch other default values.