东莞市天直播厚街钜楷鞋机店

04

CF-738

CF-738B

油壓自動前幫機(九爪/七爪)

9-Pincer/ 7- Pincer Hydraulic Toe Lasting Machine(With hot melt)

主要特点：

○本机使用于鞋面前帮部位之结帮作业。

○机器操作使用油压操作系统。

○採用PLC控制器與圖形顯示觸控螢幕，操作最穩定、簡便。

○具備自我偵錯功能，節省故障排除時間。

○爪子採用快拆設計，更換簡便，並固定於專利的雙軌跡爪盤機構（专利第36247号）

○中爪可向左右做各15度的偏擺調整，適合特殊鞋頭鞋型的排列。

○左右最後一爪可設定自動旋轉動作（专利第86206459号），使內腰轉折處的結幫效果最佳。

○爪子可以獨立設定自動下拉行程或手動操作升降，讓鞋面的張力平衡，以修正結幫最佳位置。

○內撐台上升高度，由機台外部調整。

○內撐台上升可設定為兩段動作，配合後跟頂座動作，可防止楦頭下滑。

○膠盤的前後位置，可藉由機台前方的手輪調整，最大可達16mm。

○壓頭機構採用可調二段式壓力，在一次壓的操作調整中，可依需要設定為定壓控制或定位控制。

○掃刀機構前進動作，可以無段變速調整速度。

○標準配備：
  

CF-738A：輔助掃刀機構、輔助壓邊機構和鞋頭十字燈機構。
CF-738B：鞋頭十字燈機構。

○Features:

○This machine is Used for the lasting operation of the upper’s forepart, and equipped with the applicator. The rod cement of polyester or polyamide is designed for using, which ensures higher flexibility.

○Fully hydraulic operated system.

○The PLC system is equipped with the monitor to indicate the graphical symbols.

○Error diagnostic readable on the monitor.

○9 fine adjustable and quick-exchangeable pincers are mounted on a double tracking pincer plate. (Patent No.36247).

○The first pincer can be adjusted with the 15 degrees swing angle left or right, it is suitable for the pincer arrangement of the special toe shape shoes.

○Auto rotate the last pincers of left &right to perfect the inside waist lasting. (Patent No.86206459).

○Each set of pincers (left and right) can be setting with automatic pulling or manual operated, preventing the upper made of different materials is only pulled on one side.

○The upward stroke of the last support can be adjusted from the knob outside the machine.

○There are two step upward movement functions for the last support, preventing the slipped of the last when combined with the movement of the heel support.

○The position of the applicator can be quick adjusted forward or backward up to 16mm from the knob front of the machine.

○The toe pusher mechanism is designed with adjustable two step pressure. During the movement of the initial pressure, there are two ways (pressure controlled or position controlled) can be set for the best operation.

○The forward movement of the wiper can be adjusted with stepped variable speedcontrolled.

○The standard equipment:
CF-738A：Auxiliary wiper mechanism, Auxiliary side pusher mechanism and Toe projector mechanism.
CF-738B：Toe projector mechanism.