北京冠测精电仪器行行好啊设备有限公司

RBWK-300C热变形、维卡软化点温度测定仪
RBWK-300C thermal deformation, VEKA softening point tester
功能、适用范围：
The function, scope of application:
主要用于塑料、硬橡胶、尼龙、电绝缘材料、长纤维增强复合材料、高强度热固性层压材料等非金属材料的热变形温度及维卡软化点温度的测定。操作方便、控制精确，是一种智能化极高的测试仪器，广泛应用于大专院校，科研单位及产品质量监督检验单位。
Mainly used in plastic, rubber, nylon, electrical insulating materials, determination of softening point temperature high strength composite material, laminated thermosetting materials and other non-metallic materials thermal deformation temperature and VEKA long fiber reinforced. Convenient operation, precise control, is a test equipment of intelligent high, widely used in universities, scientific research units and product quality supervision and inspection unit.
该机采用具有Windows 98、Windows2000或WindowsXP中文操作界面，实时监控试验温度、实时绘制温度及变形量的曲线，打印试验报告，实现历史存盘，鼠标点击形变和温度曲线的任何一处，界面会自动显示该处的变形量及温度值。选用高精度位移传感器测变形。
The machine with Windows 98, Windows2000 or WindowsXP Chinese operation interface, temperature and deformation of real-time rendering, real-time monitoring test temperature curve, print test reports, achieve historical disk, the mouse to click on the deformation and temperature curve at any point, deformation and temperature interface will automatically display the value. Selection of high precision displacement sensor to measure the deformation.
热变形、维卡软化点温度测定仪 执行标准：
The implementation of standards:
符合GB/T 1633-2000、GB/T 8802、
According to GB/T 1633-2000, GB/T 8802,
GB/T 1634-2004、ISO 2507、ISO 75、ISO 306、
GB/T 1634-2004, ISO 2507, ISO 75, ISO 306,
ASTMD 1525、ASTMD 648等标准要求。
ASTMD 1525, ASTMD 648 standards.
热变形、维卡软化点温度测定仪 技术参数：
Technical parameters:
1）控温范围：室温～300℃
1): room temperature to 300 ℃ temperature range
2）最大温度误差：±0.5℃
2) the maximum temperature error: ± 0.5 ℃
3）升温速度：50℃/h、120℃/h
3) the heating rate: 50 ℃ /h, 120 ℃ /h
4）温度测量点：1个
4) temperature measurement points: 1
5）试验架数：6个
5) test frame number: 6
6）变形测量范围：0～10mm
6) deformation measuring range: 0 ~ 10mm
7）最大变形误差：±0.005mm
7) the maximum deformation error: ± 0.005mm
8）试样支承跨距：64mm(平放优选)、100mm（侧立）
8) sample supporting span: 64mm (flat preferred), 100mm (Ce Li)
9）具有上限温度保护功能；
9) has an upper limit temperature protection function;
10）控制方式采用单片机和PC机分布式控制系统；
10) control by SCM and PC machine distributed control system;
12）具有试样架自动升降系统；
12) with a sample rack automatic lifting system;
13）使用介质：甲基硅油或变压器油；
13) use of media: methyl silicone oil or transformer oil;
14）冷却方式：150℃以上自然冷却，150℃以下水冷却或自然冷却。
14) cooling: 150 ℃ of 150 ℃ natural cooling, water cooling or cooling.
13）外形尺寸：920X400X1300mm
13) size: 920X400X1300mm
热变形、维卡软化点温度测定仪 配置：
To configure.
1）主机 一台
1) a host
2）试样架 六个
2) sample frame six
3）热变形压头 六个
3) thermal deformation pressure head six
4）维卡压针 六个
4) VEKA pin six
5）高精度位移传感器 六支
5) the high precision displacement sensor six
6）品牌台式计算机 一台
6) brand desktop computer
7）彩色喷墨打印机 一台
7) color inkjet printer a
8）中文版下操作系统的试验软件 一套
8) Chinese version under the operating system of a set of test software
9）电源线 一根
9) a power line
10）信号线 一根
10) signal line
11）砝码 一套
11) the weight of a

更多与维卡软化点温度测定仪-6路产品相关欢迎您来电咨询 010-57462906 15311714256
More point temperature softening and VEKA tester -6 road related products are welcome to inquire 010-57462906 15311714256