北京冠测精电仪器行行好啊设备有限公司

微机测速仪  多功能微机测速仪智能型微机测速仪

型号:G81514

微机测速仪:

本公司生产的多功能微机测速仪（multi-function micro tachometers），内置ATMEL公司的微型单片机，采用西门子仪表集成总汇技术，是当今先进的智能型测速仪表。配用低阻抗高灵敏度非接触磁电式传感器（non-touching magnetic- electrical sensor）,。该测速仪表集讯号检测、数据处理、数字显示，报警指示，报警控制和变送输出等为一体，广泛用于现场指示，闭环控制、报警控制等场所,应用于电力、冶金、化工、钢铁等行业，专业配套偶合器、鼓风机等设备。该系列测速仪表使用简便、性能稳定、抗干扰能力强，工作可靠, 是工业生产和实验室各类旋转轴的转速测量的专业仪表（all kinds of rotating shaft’s velocity measuring），可替代本特利、菲利普等 部分型号产品。

技术参数：

1. 测量显示范围（Measurement Range）: 0～9999 r/min；0～19999 r/min;V型可达105/分转速，用于高速离心机械转速测量

2. 测量精度（Accuracy）: 绝对精度±2r/min

3 .变送输出（Transmitting Output）: 4～20mA（或1～5V）

4. 传感器和测速仪距离（Distance）: 小于200米或小于1000米

5. 供电电源（Power Supply）: AC220V±10%, 50～60Hz；功耗: 小于6W；特殊电源使 用AC127V±5%, 50～60Hz

6. 使用环境（Using Ambient）:温度: 0～50℃；相对湿度:≤85%；震动系数≤±0.005URL/g

7. 带载能力（Load Capacity）：小于500欧姆，特殊要求可以提高负载电阻阻值

8. 配备XG（XS12-）系列磁电式传感器使用（magnetic-electric sensor）

应用领域：

1. 电机、发电机输出轴转速测量监视、控制

2. 汽轮机、空分机转轴监视、控制

3. 风机、水泵输入转轴速度监视、控制

4. 机车、汽车速度显示、积算、报警控制

5. 计速度、计长度、计位移场合

6. 其他与速度、长度有关的各种工业、实验室等场合。

关于微机测速仪/多功能微机测速仪/智能型微机测速仪,请来电咨询 15311714256

 
Microcomputer intelligent velocimeter multi-functional microcomputer speedometer microcomputer speedometer

Model: G81514

Microcomputer velocimeter:

The company production of multi-functional microcomputer velocimeter (multi - function micro tachometers), ATMEL company's built-in miniature microcontroller, using Siemens instrument integration company, is the advanced intelligent speed measuring instrument. With low impedance and high sensitivity non-contact magnetoelectric sensor (non - touching magnetic - electrical sensor),. The speed measuring instrument set signal detection, data processing, digital display, alarm indication, alarm control and analog output as a whole, it is widely used in field instructions, closed loop control, alarm control etc, used in electric power, metallurgy, chemical industry, steel, etc, form a complete set of professional coupling, fan and other equipment. This series of speed measuring instrument used is simple, stable performance, strong anti-interference ability, reliable work, is all kinds of industrial production and laboratory of rotation speed measuring professional instrument (all kinds of rotating shaft 's velocity measuring), alternative part such as bentley, Philip model products.

Technical parameters:

1. The measuring Range (Measurement Range) : 0 ~ 9999 r/min. The 0 ~ 19999 r/min; V type of up to 105 / min speed, used for high speed centrifugal machine speed measurement

2. The Accuracy of measurement (Accuracy) : absolute Accuracy + / - 2 r/min

3. The analog Output (Transmitting the Output) : 4 ~ 20 ma (or 1 ~ 5 v)

4. The sensor and the speedometer Distance (short) : less than 200 meters or less than 1000 meters

5. Power Supply (Power Supply) : AC220V plus or minus 10%, 50 ~ 60 hz; Power consumption: less than 6 w; Special power supply by AC127V plus or minus 5%, 50 ~ 60 hz

6. Use of the environment (Using Ambient) : temperature: 0 ~ 50 ℃; Relative humidity: 85% or less. Vibration coefficient of 0.005 mm or less URL/g

7. Loading Capacity (Load Capacity) : less than 500 ohms, special requirements can improve the Load resistance value

8. Equipped with XG (XS12 -) series of magnetoelectric sensor using (magnetic - electric sensor)

Areas of application:

1. Motor, generator output shaft speed measurement monitoring and control

2. The steam turbine, empty extension shaft monitoring, control

3. The fan, water pump input shaft speed monitoring and control

4. Speed locomotive and car shows, integrating, and alarm control

5. Speed meter, meter length, displacement meter

6. Other related to speed, length of all kinds of industrial and laboratory etc.

About microcomputer speedometer/multi-functional microcomputer speedometer/intelligent microcomputer velocimeter, please inquire