点击图片查看大图| 加工定制: | 否 |
| 型号: | 305 |
| 工作速度: | 0 |
| 品牌: | 小叮当 |
| 电机功率: | 0.5 |
细痕:0.5mm
粗痕:1mm
重量:16KG
实际压痕宽度:50cm
- 本机械设有大小压痕功能（附⑧）；
- 本机械设有标准定位尺（附⑥）；
- 本机械设有安全脚踏开关（附⑦）；
- 本机械内设有3点平衡调节螺丝；
- 本机械压痕速度每秒一次；
- 本机械超出350克厚度的纸张要把压痕刀重新调整到合适的位置；
- 本机械遇到卡纸时，压下脚踏开关，关闭电源后重新开动电源开关便可解决；
- 本机械附送脚踏开关壹套，及活动电源线壹条；
- 使用本产品可提高生产效益，操作方便；
- 颜色：主体白色，上盖为草绿色；
- 本机械免费保修壹年（除人为及天灾外）；
- 本机械颜色及外观改变不再另行通知，最终解析权以本公司为准。
步骤一：准备工作在保证电源开启的情况下，将纸张从正面放入。
步骤二：如何准确调节压痕位置：出厂时已按标准细压痕槽适用于30克-175克纸张，粗压痕槽适用于157克-350克纸张厚度调节好，如需其他尺寸需另行调节。
步骤三：调节粗细槽方法：①先松开大塑料螺帽；②按住小塑料螺帽向内推，同时向后旋转小塑料螺帽；③旋转半圈"咔"一声粗细槽转换完毕自动复位。
步骤四：调节压痕深浅：①松开上前盖调节上刀顶部三颗定位螺丝；②顺时针或者逆时针拨动定位螺丝，使得上下轴距均匀一致，并且压痕深浅合适。
步骤五：操作①打开电源开关，从正面送入纸张试压一张，如有偏差可根据情况调节侧挡规和刀具的位置；②插上脚踏开关，使用脚踏开关控制，点动操作。
User Manual
(1)The machine has the size of the indentation (with⑧);
(2)The machine has a standard positioning scale (with⑥);
(3)The machine has a safety foot switch (with⑦);
(4) Equipped with a 3:00 balanced adjustment screw;
(5)Indentation speed once per second;
(6)Out of 350 g of the thickness of the paper the indentation knife should be re-adjusted to the appropriate location;
(7)When you see paper jams, press down the foot switch, turn off the power to re-start after power switch can be solved;
(8)The machine comes with one set of foot switch, and the activities of the power cord One;
(9)Use of this product can improve production efficiency, easy to operate;
(10)Colors: the principal white superstructure grass green;
(11)The mechanical free year warranty (except for man-made and natural disasters);
(12)Themechanical color and appearance of change without further notice, the right of final resolution of the Company shall prevail.
Step 1: Preparatory work to ensure that the power is turned on, the paper placed from the front.
Step 2:How to accurately adjust the indentation position: factory applicable according to the standard thin indentation slot 30 grams -175 grams of paper, rough indentation slots for 157 grams -350 grams of paper thickness adjustment, For other dimensions to be subject toregulation.
Step 3: adjust the thickness of the bath method:①Loosen the large plastic nut;②Hold down the small plastic nut and push it inward, and backward rotation of the small plastic nut;③Half turn "click" sound the thickness of the slot conversion is completed automaticallyreset.
Step 4: Adjust the indentation depth:①Loosen the front cover to adjust on the knife at the top three positioning screws;②Clockwise or counterclockwise to toggle the positioning screw, making the upper and lower wheelbase uniform, and the indentation depth is appropriate.
Step 5: operation①Turn the power switch and a pressure from the front to feed the paper again, and if any deviation can adjust the position of the side of the stopper and tool;②Plug the foot switch, footswitch control and jog operation.
