是否提供加工定制:是 | 光源类型:LED | 功率:120W |
材质:金属 | 电压:220(V) | 品牌:凯创光电科技 |
型号:KC-RB | 防护等级:IP65 | 外形尺寸:8000(mm) |
主要适用范围:道路照明 |
凯创LED路灯的特点:
1、高效节电、环保:在同等照明效果下,LED灯比白炽灯节电90%,比日光灯节电60%,其中,LED路灯比高压钠灯节电50%以上,结合深夜智能调光节能系统,综合节电率65%--80%以上,因采用固态光源,对环境无任何污染。
2、超长寿命、减少更换量: LED路灯产品设计使用寿命5万小时,保修3年,控制及散热件保2年。
3、显色性好:LED灯与日光很接近,照射下景物更加明亮清楚,增加城市美感;亮度分布均匀,光线柔和,对周围不造成光污染,减少驾驶员眼睛疲劳,减少安全隐患。
4.绿色环保:LED路灯采用单颗1W的大功率LED作为光源,可直接接入100~240V交流电,LED所产生的光谱中没有紫外线、红外线,不产生热辐射,是典型的绿色照明光源,
5.芯片采用国际一线品牌:发光效率100lm/W,并采用1W/颗LED列阵,摒弃了小功率LED列阵和单颗大功率LED集成的落后方式,从根本上保证了发光效率和工作稳定性。
6.二次配光设计:在光学质量方面,专业设计二次光学配光透镜,使LED光源的在路面上形成矩形光斑,均匀度达到0.7,远高于高压钠灯的0.3~0.4之间。同时由于LED光源本身的特点,照明显色性达到0.8,远远高于高压钠灯的0.35左右,LED路灯在道路照明上完全达到国家道路照明标准。
7.压铸铝外壳散热,散热片设计科学合理,有效解决LED光衰问题。
The feature of Kaichuang LED street light :
1.Efficient energy-saving, environmental protection:under the same lighting effect, the energy-saving of LED light is 90% than incandescent light, 60% energy-saving than fluorescent light, of which, LED street light saving more than 50% energy than high-pressure sodium lamp, combined with late-night energy smart dimming systems, integrated saving rate of 65% - 80% or more, due to the solid state light source, without any pollution to the environment.
2.Long life, reducing replacement volume:LED street light design life of 50,000 hours, 3 years warranty, control and cooling parts guarantee for 2 years.
3.Excellent colour rendering: LED lights is very close to sunlight, bright and clear ,increase city beauty; uniform brightness, soft light, does not cause light pollution to the surrounding, reduce driver's eye fatigue and reduce the security risk.
4.Green:LED lights use high-power single 1W LED as light source, direct access to 100 ~ 240V AC, LED light does not produce UV and IR,no heat radiation, is a typical green light source.
5.The chip adopt international brands:luminous efficiency of 100lm / W, and using 1W/ pcs LED array, abandon the low-power LED array and High-power LED arrays and integration out-dated method, guarantee the luminous efficiency and stability .
6.Second optical design:in the optical quality, professional design with the second optical light lens, LED light source to form a rectangle spot on the road, to achieve uniformity of 0.7, far above the high-pressure sodium lamp of between 0.3 to 0.4. Because the characteristics of LED light source itself,color rendering of 0.8, much higher than the 0.35 of high-pressure sodium lamp, LED street light completely meet the state road lighting standard.
7.Die-cast aluminum housing for heat output, heat sink of scientific and reasonable design, and effectively solve the problem of luminous decay.