欢迎光临立诚倍电子有限公司

大量现货,批量现货热卖中.

全球知名品牌思科旗下公司—Linksys 品质保证，无需电脑，即可达到清晰的语音效果。享受全球超低话费。     咨询热线 0755-36921691              13043457008（非诚勿扰）

本公司长期销售VOIP网关，网络电话机

本公司一手货源,专供外贸商家!需要小批量的朋友请进我店铺拍
 

长期供应型号:
LINKSYS PAP2-NA    

 Linksys PAP2T-NA

Linksys SPA1001                                                     

Linksys SPA2102-NA 

 (Linksys SPA3102-NA 

 Linksys SPA9000-NA 

 IP PBX(Linksys

SPA400-NA 4FXO 

集成4FXO，与SPA9000最佳搭配。

Q. How do I manually register my SPA400 with the SPA9000?

A.In setting-up the SPA400 manually, follow the instructions below.

1) Understanding How the SPA400 Interacts with the SPA9000
2) Configuring the SPA400
3) Accessing the Web-Based Setup Page
4) Configuring the SPA400 with the Associated SPA9000 Settings
5) Configuring the SPA9000 to Register the SPA400

Understanding How the SPA400 Interacts with the SPA9000

The SPA400 provides the SPA9000 access to the PSTN by connecting the FXO ports to analog lines. There are specific Line settings on the SPA9000 that are configured to recognize a SPA400 as a service enabling calls from an IP Phone on a LVS network to be routed out to the PSTN and vice versa. The SPA400 sets up and tears down calls between the PSTN and IP Phones offering seamless telephone service with Linksys VoIP equipment.

Configuring the SPA400

The SPA400 and the SPA9000 have corresponding fields that must be properly configured for a successful installation. If the SPA9000Setup Wizardis not used, the SPA400 can alternatively be configured using the web-based setup page. To access the Web-Based Setup Page, launch a browser application and enter the IP address of the SPA400. By default, the SPA400 is configured toObtain an IP Addressvia DHCP. Running the SPA9000Setup Wizardwill automatically detect the IP Address of the SPA400 to simplify installation.

Accessing the Web-Based Setup Page

Upon entering the IP Address of the SPA400 on the address bar, a password request page will appear then use the defaultUser Name"Admin" and leave thePasswordfield blank (no password) to login. ClickOKto access the web-based setup page. Using a password to access the SPA400 prevents unauthorized users from changing the settings of the device. A new password can be entered by clickingAdministrationthenManagement.

Configuring the SPA400 with the Associated SPA9000 Settings

The following section provides the principal steps to configure a SPA400 on a LVS network with a SPA9000. The example configuration assumes that a SPA9000 will be configured to access the PSTN only and therefore the SPA400 is configured in Line 1 on the SPA9000. However, if a VoIP Service Provider is also to be defined, then a SPA400 can be configured in any of the available Lines (1-4) tabs in the SPA9000 configuration utility.

Note:A complete listing of all SPA400 menu items can be found towards the end of this guide that provides additional information on the SPA400 parameters and settings using the web-based configuration utility.

From the SPA400 web-based setup page, clickSetupand select the SPA9000 Interface menu item.

User ID:
Enter the User ID of the SPA9000 in theUser IDfield. The User ID setting must be identical to the User ID configured in the associated field in the Line # on the SPA9000.

Discover Automatically:
TheDiscover Automaticallyradio button enables the SPA400 to learn the IP address and the UDP port of the SPA9000 the from the SIP Registration packets sent by SPA9000.

Discover Automatically:
TheDiscover Automaticallyradio button enables the SPA400 to learn the IP address and the UDP port of the SPA9000 the from the SIP Registration packets sent by SPA9000.

Static Address:
It is preferred that the SPA400 is configured with a static IP address. Enter the IP address and the UDP port of the SPA9000 to enable the SPA400 to listen for the SIP Registration request from the SPA9000. If the SPA9000 obtains an IP address from a DHCP server, it is preferred that theDiscover automaticallyoption is selected to avoid registration failure due to SPA9000 IP addresses changes.

Figure 1andFigure 2reflect the web-based setup page for the SPA400 and SPA9000. In the configuration example below, the SPA400 is listed as the Line 1 service, permitting PSTN access for the SPA9000. The two User ID fields are referenced below with the identical "SPA9000" User ID entered on each configuration utility.

ClickSave Settingsat the bottom of the page and then theRestarton the SPA400 web-based setup page. The SPA400 device will reboot. After configuring the SPA400, continue configuring the SPA9000. For instructions, follow steps below.

Configuring the SPA9000 to Register the SPA400

There are three setting that must be configured on the SPA9000 to complete the SPA400 installation. Select the appropriate Line tab from the SPA9000 configuration utility (Line 1 is used in the example in Figure 2). From this configuration page, the following fields must match the settings entered in the SPA400 configuration:

SIP Settings: SIP Port =5060 (SPA400 Port)
Subscriber Information: User ID =SPA9000 (SPA400 User ID)
Proxy and Registration: Proxy =192.168.15.107 (SPA400 IP Address)

ClickSubmit All Changesthen the SPA9000 will reboot. This means the SPA9000 is now configured to access the PSTN allowing calls to be routed to and from the analog line(s) connected to the SPA400.