点击图片查看大图
提示信息机器名称：自动单色气动移印机
型号：SUV-800
The machine name: pneumatic automatic monochrome printing machine
Model: SUV-800
移印机的特点The characteristics of the pad printing machine
1.微电脑控制，功能实用，操作简便、易掌握；
2.采用名牌原厂硬化轴套及气动元件，廷长机件寿命及性能；
3.独立的胶头及前后行程速度调节，满足不同的印刷需要；
4.油辊滚动上墨，方便装拆和清洗；
5.刮油刀自动平衡，钢板厚薄可进行独立调节补偿，刮油干净利落；
6.设置四位数自动计数器，方便记录印刷的产品数量；
7.胶头可前后空行不落印，以防止暂停时油墨干涸；
8.多级速度控制，以满足不同的印刷速度要求；
9.可独立调较油盘X、Y方向移动及角度调整，使印刷定位准确及节约钢板使用空间；
10.机身采用优质钢架结合结构，质轻体固，美观实用；
11.配备脚踏紧急切断系统，方便单次试印调机及紧急停止运作，符合国际工业安全标准；
12.配置标准程序及非标编程，突破一般机械性能，无限制编程取墨及印刷的次数。
1 microcomputer control, functional and practical, simple operation, easy to master; 2 the use of brand-name original factory hardened sleeve and pneumatic components, service life and performance of long Ting machine; Glue head and front and rear travel speed 3 independent regulation, to meet different printing needs; The 4 oil roller inking, convenient assembly and disassembly and cleaning; 5 oil scraper automatic balance, steel plate thickness can be adjusted independently compensation, the oil scraping clean; The 6 set of four digit auto counter, convenient record number of printing products; 7 glue head can be stamped on front and back without pause, prevent ink drying; 8 multi speed control, in order to satisfy the different requirements of the printingspeed; 9 X, Y direction and angle independent tone than pan adjustment, make the printing plate positioning accuracy and save the use of space; The 10 body is made of high quality steel frame combined structure, light and solid,beautiful and practical; 11 equipped with foot emergency cut-off system, convenient single try printingmachine and emergency stop operation, in line with international industrial safety standards; The 12 configuration standard procedures and non-standard programming, break the general mechanical properties, no limit on the number of programming from inkand printing.
机器用途The machine uses
移印机是一种印刷机器，适用于塑胶、玩具、玻璃、金属、陶瓷、电子、IC封等等。工艺过程很简单，先将设计好的图案蚀刻在印刷平板上，把蚀刻板涂上油墨，然后，通过硅胶头将其中的大部分油墨转印在被印刷物体上. 这种印刷技术效果精美，细致。并且极适合在小面积、凹凸面等其他印刷工艺难以奏效的地方，因此移印机广泛用于电器，塑胶、玩具、玻璃等行业
Pad printing machine is a kind of printing machine, suitable for plastic, toys, glass,metal, ceramic, electronic, IC sealing etc.. The process is very simple, first the good design pattern etched on the printing plate, the printing ink, coating and etching,using silica gel ink transfer head will most of which are in the printed object. This kind of printing technology effect of exquisite, meticulous. And very suitable fordifficult to work in a small area, the concave convex surface and other printing process where the printing machine, therefore widely used in electrical appliances,toys, plastic, glass and other industries
技术参数Technical parameters
钢板最大尺寸Max steel plate size(mm) | 100 X 100 |
印刷最大面积Maximum printing area(mm) | 70 X 75 |
印刷产品的高度The height of the printing products(mm) | 1-200 |
前后行程Before and after stroke(mm) | 125 |
速度SPEED/hr | 1000-2200 |
机体尺寸 LxWxH(mm) | 45*66*1360 |
机体重量The body weight(kg) | 100 |
用气压力Air pressure(bar) | 3-6 |
电源Power Supply | 110/220v 50/60Hz |
移印原理
单:是指单头移印机使用,本机是单头,只需将运行模式设置为单即可。
双:是指双色移印机使用,本机是单头,本机用不了。
二次沾墨:是有些产品吸收能力极差，碰到这种情况，要将运行模式设置成二次沾墨，来达到理想的印刷效果。
试位:是用来调试胶头的压力。
速度:工作中用来调试印刷的速度，（机器在工作时也可调节）。
1 2 3 4:这是速度显示，1为最慢，4为最快。
空行/自动:空行，是机器刮刀运行，胶头不下压，检查刮刀是否能将印版上的油墨刮干净，如刮不干净，可将气压加大，另外检查印版是否放平整了，自动，是调试好之后，开自动，就可以工作。
启动:机器一切调试好之后，可以开始工作，点下启动开关就开始工作了，暂停，如中途要停顿，点下暂停按钮，机器这时处于停止状态。
清零:工作的时候计算印刷的数量，按下清零开关，之前计算的数量，全部清零。
Single: refers to the use of single head pad printing machine, this machine is asingle head, simply operation mode can be set to single. Double: refers to the use of double color printing machine, this machine is a single head, the machine can not use. Two stained with Mo: is that some products absorption ability range, encounter this kind of situation, will run mode is set to two times with ink, to achieve the idealprinting effect. A: is used to debug the rubber head pressure. Speed: the work used to debug the printing speed, (machine at work can also be adjusted). 123 4: this is the slowest speed display, 1, 4 for the fastest. Blank lines / automatic: blank lines, is the machine scraper operation, the rubber head is not under pressure, check the scraper can scrape the printing ink, such asscraping clean, can be pressure increase, also check the printing plate is placedflat, automatic, automatic opening and debugging is good, you can work. Start the machine after all: good debugging, can begin to work, start switch pointbegan to work, such as the half-way to pause, pause, pause button machine point,then in a stopped state. Zero: work while calculating number of printing, press the reset switch, the number of previously calculated, all reset.
印刷示例 Printing sample:
移印机的保养The pad printing machine maintenance
为了确保电磁阀能正常工作，并延长其使用寿命，操作保养中要注意：
一、空压组件：
1、勿使用过多水分及杂质进入气压系统，以避免故障及使用寿命减少。
2、保持压缩空气之干燥与洁净。
3、每日将空气压缩机内水分排泄一次。
二、三点组合
1、使用气压保持4-7KG/CM以内。
2、每日排放滤水杯子水分一次以上。
3、检查润滑油量是否注满。
4、手动排放阀长时间不用时，应推放于后端。
三、润滑
1、空气油理组合：需用指定的润滑油。
2、轴承之润滑:各类黄油。
四、其他
1、当机器停止工作或需要移动及修理时，必须将电源和气源切断。
2、调速阀系精密组件，尽量避免碰损。
3、当调整或清洗油盅时，应按步骤操作。
4、增强防火意识，配备消防器材。
In order to ensure the electromagnetic valve can work normally, and prolong its service life, pay attention to operation maintenance: A, air compressor assembly: 1, do not use too much moisture and impurity entering the air pressure system, in order to avoid failure and service life reduction. 2, keep dry and clean compressed air. 3, the daily will air compressor water discharge time. Two or three point combination 1, the use of air pressure maintained within 4-7KG/CM. 2, the daily discharge of water filter water cup more than once. 3, check whether the amount of oil filled. 4, manual discharge valve long time when not in use, should be placed in the rear end of the push. Three, lubrication 1, air oil combination: lubricating oil with the specified. 2, bearing lubrication: all kinds of butter. Four, other 1, when the machine stops working or need to move and repair, must be cut off the power supply and air supply. 2, speed control valve system precision components, try to avoid damage. 3, when the adjustment or cleaning the oil cup, should follow the steps. 4, enhance the awareness of fire prevention, equipped with fire fighting equipment.
服务承诺Service commitment
（1）、免费上门安装调试设备。
（2）、提供全面的操作培训。
（3）、直到操作员能独立生产。
(1), free on-site installation and commissioning of equipment. (2), to provide comprehensive operation training. (3), until the operator independent production.
