点击图片查看大图
提示信息| 厂家(产地): | 沙伯基础(原GE) |
| 牌号: | SE1X-701 |
| 加工级别: | 注塑级 |
| 用途级别: | 通用级,汽车部件,电子电器部件 |
| 销售方式: | 品牌经销 |
| 类型: | 标准料 |
东莞瑞鑫塑胶原料有限公司是一家长期专业供应胶原料的企业,我们从事塑胶行业十多年,拥有一支有丰富经验的团队为您提供塑胶原料物性及技术指导,用途级别,质量环保认证和价格信息,选择瑞鑫塑胶订购你所要的塑胶原料。
SABIC Innovative Plastics Noryl SE1X-7001 PPE+PS
| Categories: | Polymer;Thermoplastic;Polyphenylene Ether/PPO;Polystyrene
|
| Material Notes: | PPE+PS blend. Unfilled. Non-brominated, non-chlorinated FR system. UL94 V1, UL746C F1. Dielectric strength. Suitable for E/E market indoor/outdoor applications. This data was supplied by SABIC-IP for the Americas and Asia Pacific regions. |
Physical PropertiesMetricEnglishCommentsMechanical PropertiesMetricEnglishCommentsElectrical PropertiesMetricEnglishComments
| Specific Gravity | 1.09g/cc | 1.09g/cc | ASTM D 792 |
| Water Absorption | 0.0600 % | 0.0600 % | 24 hrs; ASTM D 570 |
| Linear Mold Shrinkage, Flow | 0.00500-0.00700cm/cm @Thickness 3.20 mm |
0.00500-0.00700in/in @Thickness 0.126 in |
SABIC Method |
| Linear Mold Shrinkage, Transverse | 0.00500-0.00700cm/cm | 0.00500-0.00700in/in | Tensile Bar; SABIC Method |
Melt Flow |
8.00g/10 min @Load 5.00 kg, Temperature 280 °C |
8.00g/10 min @Load 11.0 lb, Temperature 536 °F |
Melt Volume Rate (cm^3/10 min); ISO 1133 |
| 8.50g/10 min @Load 5.00 kg, Temperature 280 °C |
8.50g/10 min @Load 11.0 lb, Temperature 536 °F |
ASTM D 1238 | |
| Tensile Strength at Break | 50.0MPa | 7250psi | 50 mm/min; ISO 527 |
| 53.0MPa | 7690psi | Type I, 50 mm/min; ASTM D 638 | |
| Tensile Strength, Yield | 61.0MPa | 8850psi | 50 mm/min; ISO 527 |
| 65.0MPa | 9430psi | Type I, 50 mm/min; ASTM D 638 | |
| Elongation at Break | 15.0 % | 15.0 % | Type I, 50 mm/min; ASTM D 638 |
| 20.7 % | 20.7 % | 50 mm/min; ISO 527 | |
| Elongation at Yield | 4.00 % | 4.00 % | Type I, 50 mm/min; ASTM D 638 |
| 4.30 % | 4.30 % | 50 mm/min; ISO 527 | |
| Tensile Modulus | 2.50GPa | 363ksi | 50 mm/min; ASTM D 638 |
| 2.67GPa | 387ksi | 1 mm/min; ISO 527 | |
| Flexural Modulus | 2.40GPa | 348ksi | 2.6 mm/min, 100 mm span; ASTM D 790 |
| 2.56GPa | 371ksi | 2 mm/min; ISO 178 | |
| 2.70GPa | 392ksi | 1.3 mm/min, 50 mm span; ASTM D 790 | |
| Flexural Yield Strength | 98.0MPa | 14200psi | 2.6 mm/min, 100 mm span; ASTM D 790 |
| 99.0MPa | 14400psi | 2 mm/min; ISO 178 | |
| 100MPa | 14500psi | 1.3 mm/min, 50 mm span; ASTM D 790 | |
| Izod Impact, Unnotched | 26.0J/cm @Temperature 23.0 °C |
48.7ft-lb/in @Temperature 73.4 °F |
ASTM D 4812 |
| Impact Test | 49.0J | 36.1ft-lb | Instrumented Impact Total Energy; ASTM D 3763 |
| Izod Impact, Notched |
1.06J/cm @Temperature -30.0 °C |
1.99ft-lb/in @Temperature -22.0 °F |
ASTM D 256 |
| 1.80J/cm @Temperature 23.0 °C |
3.37ft-lb/in @Temperature 73.4 °F |
ASTM D 256 | |
| Izod Impact, Notched (ISO) | 14.0kJ/m⊃2; @Thickness 4.00 mm, Temperature 23.0 °C |
6.66ft-lb/in⊃2; @Thickness 0.157 in, Temperature 73.4 °F |
80*10*4; ISO 180/1A |
| Volume Resistivity | 2.30e+16ohm-cm | 2.30e+16ohm-cm | ASTM D 257 |
| Surface Resistance | >=1.00e+15ohm | >=1.00e+15ohm | ASTM D 257 |
| Dielectric Constant | 2.52 | 2.52 | ASTM D 150 |
| 2.46 @Frequency 1.00e+6 Hz |
2.46 @Frequency 1.00e+6 Hz |
ASTM D 150 | |
| Dielectric Strength | 18.1kV/mm @Thickness 3.20 mm |
460kV/in @Thickness 0.126 in |
in oil; ASTM D 149 |
| Dissipation Factor | 0.00340 | 0.00340 | ASTM D 150 |
| 0.00210 @Frequency 1.00e+6 Hz |
0.00210 @Frequency 1.00e+6 Hz |
ASTM D 150 | |
| Arc Resistance | 60.0-120sec | 60.0-120sec | Tungsten; PLC Code 6; ASTM D 495 |
| Comparative Tracking Index | 400-600V | 400-600V | UL 746A |
| High Voltage Arc-Tracking Rate, HVTR | >=150mm/min | >=5.91in/min | PLC 4; UL 746A |
| |
|||
温馨提示：
产品价格、参数等仅供参考，详情请来电或旺旺咨询！
如果不经过协商而直接下单，恕不发货！敬请谅解！谢谢配合！
来电：13528558270
