点击图片查看大图
提示信息| 是否提供加工定制： | 是 | 类型： | 轴流风扇 |
| 品牌： | QSUN | 型号： | DC4015 |
| 电机功率： | 0.6（w） | 电压： | 12（V） |
| 电流： | 0.08（A） | 适用范围： | 家电,数码 |
| 风量： | 25 | 风叶直径： | 看图纸 |
| 转速： | 4500 |
1．机构Mechanical: | |
1-1．外观尺寸External dimension | 参考附图Refer to drawing |
1-2．外观Appearance | 目视无披峰、损伤、变形、生锈、油污等不良现象 There shall be no excessive scratches，dents or deformation，when inspected by naked eyes. |
1-3．重量Weight | 24g/pcs |
1-4．轴承Bearing | 含油轴承Sleeve bearing |
2．电气特性Electrical characteristics (在通风及额定电压条件下in free air at rated voltage) | |
2-1．额定电压 Rated voltage | 12V |
2-2．额定电流 Rated current | 0.11A（MAX0.13A） |
2-3．额定输入功率Rated input power | 1.32W（MAX1.56W） |
3．效率Efficiency | |
3-1．风扇转数Rated speed | 5000±10%RPM. |
3-2．最大风量Maximum air flow | 8.0CFM |
3-3．最大静压Maximum static air pressure | 0.15inch-H2O |
4．特性规格Characteristics | |
4-1．运转方向Directing of rotation | CW（贴标签面看叶片顺时针方向运转） |
4-2．操作电压Operating voltage range | 8V~12V |
4-3．起动电压Starting voltage | 8V(ON/OFF) |
4-4．锁定电流Locked current | 无锁定保护功能 |
4-5．操作温度Operating temperature | -10℃~+70℃ |
4-6．储存温度Storage temperature | -30℃~+85℃ |
4-7．环境湿度Environment humidity | 10%℃(RH) 45℃for24 hours & (RH)45℃for24 hours |
4-8．绝缘阻抗强度Insulation resistance | 在本体与两条导线间加500V直流电压之绝缘阻抗在10MΩ 以上 At least10MΩ at 500VDC between housing and both leadwires. |
4-9．绝缘耐压强度Dielectric strength | 必须能抵抗在本体与两线间加500V交流电压1分钟lmA。 Withstand 500 VAC 1 minute 1mA between housing and both lead wires. |
4-10．预期寿命（MTBF）：指在额定电压及正常温度，湿度条件下连续运转 Life expectance: continuous operation at rated voltage and normal temperature & humidity | |
4-10-1．含油轴承预期寿命：20000小时 Sleeve bearing life expectance: 20000h | |
规格说明书 Specifications | ||||
4-11端子抗拉强度Tensile strength of connector | 端子以1公斤的拉力拉扯15秒不会脱落 Connector will not be any broken at 1kg for 15seconds per piece. | |||
4-12.噪音分贝Acoustic sound level | 30dB (Max) | |||
4-12-1.噪音测试说明Acoustic sound level test descriptions 以额定电压在噪音实验室中测试（背景噪音18分贝以内） At rated voltage in sound proofroom Background noise:18dB
悬吊Suspension
1m 麦克风感应器 MIC.
通风状态 (对准风扇中心)
Free air (Alm to center of the fan)
风扇Fan
5.特性定义Characteristics | ||||
5-1. 额定电流＆额定转速＆额定操作功率，须在额定电压下；马达连续转５分钟达到规格下限，10 分钟达到正常值 Rated current, rated speed, and rated input power shall reach bottom line of specification after 5 minutes Continuous rotation at rated voltage and reach standard specification after 10 minutes continuous voltage.
5-2.起动电压是指突然通电后能够使风扇起动之最低电压 Starting voltage is the least voltage that enables to start the fan by sudden power on
| ||||
5-3.轴向间隙Shaft end play | 马达水平方向放置0.5~0.8mm With dial-gauge and so on. | |||
5-4.轴垂直度 Perpendicularity of shaft | 安装平面为基准测试90±0.5º Measuring based on the mounting plate. | |||
5-5.轴长同心度 Shaft deflection | 从安装平面3mm测试<20µmor less At the point 3.0mm from the mounting plate. | |||
6．安全规格Safety |
| CE TUV |
| |
7．原材料Material | ||||
项次 Item | 主要元件 Major components | 材质或型式 Material & Specification | 等级 Grade | 备注 Remark |
7-1 | 外框 Fan Frame | PBT 70% +Fiber 30% | 94V-0 |
|
7-2 | 扇叶 Fan blade | PBT 70% +Fiber 30% | 94V-0 |
|
7-3 | 轴心 Stator core | 不锈钢 Stainless steel (SUS420J2) |
|
|
7-4 | 轴承 Bearing | 滚珠轴承或含油铜轴承 Ball bearing or sleeve bearing (Cu+GLY)-2100 |
|
|
7-5 | 橡胶磁铁 Rubber magnet | 铁锶粉末化合物 Strontium ferrite (BQB14W) |
|
|
7-6 | 矽钢片 Silicon steel strip | (H23) (H-18) |
|
|
7-7 | 漆包线 Enameled copper wires | 去膜直径0.04~0.20 Material & specification 0.04~0.20mm | MW-2 UEW | 耐热Heat resistance 120℃ |
7-8 | 印刷线路板 Printed CircuitBoard | 单层印刷线路板 Wiring printed single layer board | 94V-0 | CAM-1 Tl0.8mm |
7-9 | 电源线 Lead wires | 聚乙烯氯化物包铜线 Polyvinyl Chloride enameled Copper wirer (AWG#26) | 94V-0 | 红线：正极 黑线：负极 Red wire+polarity Black wire:-polarity |
7-10 | 贴纸 Label | 多元脂 Polyester |
|
|
7-11 | 端子接头 Connector housing | 2510P端子 | 94V-0 |
|
8. 出货检验程序Product inspection procedure | ||||
本公司出货检验程序均依照下列步骤实施Inspection procedures below are extremely followed.
8-1.100%生产线上电性;死角,扇叶拉拨. 100%Electric;rotating,dead spot,fan blade fasten, and primary noise test on production line.
8-2.100%生产线上以示波器作正常电流波形筛检 100% Current wave test with scope on production line.
8-3.100%以手敲击测试及静音室异音过滤 100% Strick test by hand and noise filter in quiet room.
8-4.10cm落地试验依MIL-STD-105E作抽样 10cm drop test at random in accordance with MIL-STD-105E standard
8-5出货抽样检验依MIL-STD-105E作允退判定 Random inspection in accordance with MIL-STD-105E standard.
8-6允退标准如下P 加严Critical AQL:0.4 正常Major AQL:0.65 宽松Minor AQL:1.0 | ||||
