乐清市会商岛赛邦电气有限公司

型号：HG140-45W

功率：0.045（kVA）
重量：0.3（kg）   用途：用于配电柜加热，除湿，保温，控温。
技术数据:
1、工作电压：110-240V AC/DC * (最少的110V, 最大265V)
2、发热设备：PTC 电阻器, 自行调控和温度限制
3、加热体：正极化铝制外壳
4、连接：3压力钳位为分股导线0.5-1.5mm. (与导线末端线代) 并且刚性导线0.5- 2.5mm.
5、连接外壳：塑料根据UL94 V-0, 黑
6、固定方式：截面为35mm DIN 路轨, EN 50022
7、贴合位置：垂直
8、操作/保持 温度：-45 至+70 .C (-49 至+158 .F)
9、保护类型/防护等级：IP20/I (接地)
10、认证：CE
工作电压在140V 之下AC/DC 大约减少热化表现10% 。 

 Semiconductor Heater

• Pressure clamp connectors
• Dynamic heating up
• Wide voltage range
• Temperature limiting
• Energy saving
• Clip fixing
• Quick installation
  
  These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature may not fall below a minimum value. The aluminium profile heater body design has a chimney effect and distributes the heat evenly. The pressure clamp connectors save time and simplify installation.
  
  

  Operating voltage	120-240V AC/DC* (min. 110V, max. 265V)
  Heating element	PTC resistor, self regulating and temperature limiting
  Heater body	extruded aluminium profile, anodised
  Connection	3 pressure clamps for stranded wire 0.5-1.5mm² (with wire end ferrule) and rigid wire 0.5- 2.5mm²
  Connection casing	plastic according to UL94 V-0, black
  Mounting	clip for 35mm DIN rail, EN 50022
  Fitting position	vertical
  Operating/Storage temperature	-45 to +70 °C (-49 to +158 °F)
  Protection type/Protection class	IP20 / I (earthed)
  Approvals	VDE + UL File No. E150057
  Accessoires	screw fixing, Art. No. 09024.0-00 (1 packing unit = 2 pieces)
  *Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.

  
  
  

  Art. No.	Heating capacity*	Inrush current max.	Length (L)	Weight (approx.)
  14000.0-00	15W	1.5A	65mm	0.30kg
  14001.0-00	30W	3.0A	65mm	0.30kg
  14003.0-00	45W	3.5A	65mm	0.30kg
  14005.0-00	60W	2.5A	140mm	0.40kg
  14006.0-00	75W	4.0A	140mm	0.50kg
  14007.0-00	100W	4.5A	140mm	0.50kg
  14008.0-00	150W	9.0A	220mm	0.70kg
  *at 20°C (68°F) ambient temperature