无锡达丰精密仪程序直播器商行

■对应各国的粗度规格表示机。
    
    ■大型LCD屏幕窗口，易于清晰读取。
    
    ■使用触控式面板（具抗污性），操作简易。
    
    ■可将数据储存于记忆卡（选购品）。
    
    ■任意长度设定机能。
    
    ■仅按PRINT键即可藉由内藏式打印机打印出量测之结果（可选择不同之打印方式）。
    
    ■内藏充电电池，本体携带方便也可收置检出器。
    
    ■拥有丰富的参数：自动校正机能、统计处理、合否判定机能、客户自行编辑设计机能判定机能

平移范围12.5mm（5"）
    
    测量范围300μm（±150μm）[12000μinch（±6000μinch）]
    
    驱动/检测元件探测仪:178-390/178-395
    
    测头:金刚石
    
    测量力:4mN/0.75mN
    
    探测方式:微感应
    
    评定轮廓P，R
    
    估计参数Ra,Ry,Rz,Rt,Rp,Rq,Sm,S,Pc,P3z,mr
  数字过滤2CR-75%,2CR-75% PC,Gaussian-50%
    
    截至λC 0.25,0.8,2.5mm
    
    波长λS 2.5,8μm
    
    取样长度（L）0.25,0.8,2.5mm
    
    显示LCD
    
    打印机－－－－
    
    放大垂直－－－－
    
    倍数水平－－－－
    
    数据输出通过RS232C接口/SPC输出
    
    电源通过AC适配器/电池（可充电）
    
    尺寸62×156.5×52mm
    
    重量0.48kg 

Series SJ series
FEATURES: THIS PRODUCT IS SOLD OUT/HAS BEEN DISCONTINUED The display unit demonstrates IP53 protection level and is resistant to dripping water and dust. The built-in battery, if fully charged, allows approximately 500 measurements to be made. A convenient carrying case is supplied as standard for protecting the instrument in the field. Up to 10 measurement results can be saved in the built-in memory. Measurement results appear in large characters on the large LCD screen. Results can be confirmed at a glance. Detailed set-ups, such as change of standards and cutoff lengths, can be made by pressing the relevant buttons after sliding back the top cover. The SPC connector for Digimatic output and the RS-232C output connector are provided on the rear panel of the display unit for data output to external devices. Printout of recorded profiles is also possible if the tester is connected to the dedicated hand-held, built-in battery operated compact SJ-printer (optional). Technical Data X-axis (drive unit) Measuring range: .49" (12.5mm) Measuring speed: .01", .02"/s (0.25, 0.5mm/s) .01"/s (0.25mm/s: S-type) Traversing direction: Backward Detector Range: 13780µin (-7880µin to+5900µin) {350µm (-200µm to +150µm)} Detecting method: Skid measurement Measuring force: 4mN or 0.75mN (low force type) Stylus tip: Diamond, 90°/5µmR (60¨¬/2µmR: low force type) Skid radius of curvature: 40mm Skid force: less than 400mN Detecting method: Differential inductance Power supply: Via AC adapter / rechargeable battery Battery life: Max. 600 measurements (w/o printing) Recharge time: 15 hours Data output Via RS-232C interface / SPC output Dimensions (WxDxH) Control unit: 6.7 x 2.4 x 2.0" 156.5 x 62 x 52mm} (SJ-201) 4.5 x .90 x 1.02" Drive unit: 115 x 23 x 26mm Mass Control unit: Approx. 0.3kg (SJ-201) Drive unit: 0.2kg Evaluation Capability: SJ-201 Applicable standard: JIS"82, JIS"94, JIS"01, DIN, ISO, ANSI Assessed profile: Primary profile le (P), Roughness profile (R), DIN4776 (Primary profile (P), Roughness profile (R), MOTIF (R):M-type) Evaluation parameters: Ra, Ry, Rz, Rq, S, Sm, Pc, R3z, mr (c), Rt, Rp, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2, Vo (can be customized) (R, AR, Rx: M-type) Digital filter 2CR, PC75, Gaussian Cut-off length ëc: .01, .03, .1" (0.25, 0.8, 2.5mm) ës: 1", .3" (2.5, 8mm). Number of sampling length: X1, X3, X5 Arbitrary length: .01"± to .49"± (0.3 to 12.5mm) .01"± (0.1mm) increments Sampling length (L): .01, .03, .1" (0.25, 0.8, 2.5mm) Function Customization: Desired parameters can be selected for calculation and display.GO/NG judgment: Upper / lower limit setting: 2 parameters Measurement conditions saving: Saves the conditions when the power is turned off. Data saving: A maximum of 10 measurement results can be saved. Calibration: Auto-calibration with the entry of numerical value Power saving function: If the auto-power-off function is ON then power turns off if no operation for 30 seconds. AC adapter:526688A Battery pack:12BAA240