点击图片查看大图
提示信息| 品牌： | LHT光纤收发器 | 型号： | HTB-1100S-40 |
| 接口类型： | SC | 线缆类型： | sx |
| 传输距离： | 40（m） | 传输方式： | sc |
| 发射波长： | 1310（nm） | 发射功率： | 1300（dbm） |
| 电压输入： | 5（V） |
技术参数
u骨干特征 | |
符合 | IEEE802.3 10Base-T标准 |
符合 | IEEE802.3u 10/100Base-TX/FX标准 |
符合 | IEEE802.3X标准 |
u端口传输速率 | |
光口 | 155Mbps |
电口 | 100Mbps |
u双工支持 | |
lHSGQ系列光纤收发器支持全/半双工自动协商功能 | |
l10/100/1000M自适应 | |
l整机发热小，性能稳定可靠，即插即用，可机架安装 | |
l完备的LED状态指示，便于网络诊断和故障检查 | |
l全双工流量和半双工背压流量控制，自动复位功能，防止死机现象 | |
u网络线缆 | |
l10/100/1000Base-TX UPT 5类线 | |
l1000Base-FX | |
l单模光纤：9/125µm | |
u传输距离 | |
10/100Base-TX | 100m |
100Base-FX |
|
单模光纤 | 20/40/60/80/100/120Km |
uLED显示 | |
PWR | 电源状态 |
TX | 电口接收数据 |
FXLINK | 光口连接状态 |
RX | 光口传送数据 |
u接口类型 | |
l1个RJ45 10/100Base-TX端口 | |
l1个SC/ST多模/单模接连器 | |
u环境参数 | |
工作温度 | 0℃~+56℃ |
储存温度 | -40℃~+86℃ |
相对湿度 | 5%~90% |
u其他参数 | |
电源外置 | 160mm×110mm×30mm |
额定供电电压 | AC220V/50Hz |
外置电源 | DC 5V/1A |
功率 | ≦5W |
Features:
Supporting :Full duplex and half –duplex transmission and capable of automatic negotiation. efficient built-inswitching core ,to implement flow control and reduce broadcast packets.
Supporting :The transmission of extra-long packets over
VLAN Supporting :The selection of multiple types of fiber ports such as dual-fiber multi-mode .dual-fiber single –mode and single –fiber single –mode, to satisfy the extended requirements of users.
Parameter:
| Parameter | Specifications |
| Access mode | 10/100Mbps |
| Standard | IEEE802.3 10Base-T Ethernet,IEEE802.3u,100Base-TX/FX Fast Ethernet, IEEE802.3x Flow control,IEEE802.1q VLAN,IEEE802.1p QoS,IEEE802.1d Spanning Tree |
| Wavelength | 850nm/1310nm/1550nm |
| Transmission distance | Dual-fiber multi-mode: 2Km; dual-fiber single-mode: 25/40/60/80/100/120Km; single-fiber single-mode: 25/40/60/80/100Km Category-5 twisted pair: 100m |
| Port | One RJ45 connector, connected to STP/UTP category-5 twisted pair One fiber port: Multi-mode - SC or ST (fiber size: 50,62.5/125µm) Single mode - SC/FC fiber port (fiber size: 9/125µm) Single-fiber single-mode - SC/FC fiber port (fiber size: 9/125µm) |
| Conversion mode | Medium conversion, storing and forwarding |
| MAC address table | I K |
| Buffer space | 1Mbit |
| Flow control | Full duplex state: flow control; half duplex state: back pressure mode |
| Delay | 9.6us |
| Bit error rate | <1/1000000000 |
| MTBF | 100,000 hours |
| LED | Power TX link ( fiber link action ), TP LINK1000, TP LINK100, TP ACT ) FDX (FX full duplex mode), FX100 (Fiber, with a transmission rate of 100M) TP1/2/3/4 LINK/ACT (1/2/3/4-port twisted pairs connection action) TP1/2/3/4100 (1/2/3/4-port twisted pairs, with a transmission rate of 100M) |
| Power | AC220 0.5A/PC-48(builtin) |
| Power consumption | 5W |
| Operating temperature | -10℃~55ºC |
| Operating humidity | 5%~90% |
| Storage temperature | -40℃~70ºC |
Ordering Choice:
| Model | Working wavelength | Fiber | Electrical port | Fiber model | Tx power(dBm) | Rx power(dBm) | Transmission distance |
| WN-MC-110-SC-2S | 1310nm | SC | RJ-45 | Dual-fibe Multi-mode | -22 to -12 | = -30 | 2km |
| WN-MC-110-SSC-25S | 1310nm FP | SC/FC/ST | RJ-45 | Single modeDual -fiber | -15 to -8 | = -37 | 25km |
| WN-MC-110-SSC-40S | 1310nm FP | SC/FC/ST | RJ-45 | Single mode Dual-fiber | -8 to -3 | = -37 | 40km |
| WN-MC-110-SSC-60S | 1310nm FP | SC/FC/ST | RJ-45 | Single mode Dual-fiber | -3 to 0 | = -37 | 60km |
| WN-MC-110-SSC-80S | 1550nm DFB | SC/FC/ST | RJ-45 | Single modeDual-fiber | -8 to -3 | = -40 | 80km |
| WN-MC-110-SSC-100S | 1550nm DFB | SC/FC/ST | RJ-45 | Single mode Dual-fiber | -3 to 0 | = -40 | 100km |
| WN-MC-110-SSC-120S | 1550nm DFB | SC/FC/ST | RJ-45 | Single mode Dual -fiber | 0 to 3 | = -40 | 120km |
| WN-MC-110S-SC-25S | 1310/1550nm | SC | RJ-45 | Single mode single-fiber | -13 to -8 | ≤ -36 | 25km |
| WN-MC-110S-SC-40S | 1310/1550nm | SC | RJ-45 | Single modeDual-fiber | -8 to -3 | ≤ -36 | 40km |
| WN-MC-110S-SC-60S | 1310/1550nm | SC | RJ-45 | Single mode Dual-fiber | -10 to -5 | ≤ -36 | 60km |
| WN-MC-1110S-SC-80S | 1310/1550nm | SC | RJ-45 | Single mode Dual -fiber | -5 to -3 | ≤ -36 | 80km |
