点击图片查看大图| 加工定制: | 是 |
| 型号: | ZXBBJ |
| 防护等级: | IP54 |
| 光源类型: | 白炽灯 |
| 光源功率: | 10 |
| 电压: | 24 |
| 主要适用范围: | 爆炸性气体混合物危险场所：1区、2区 |
|
|||
|
|||
产品特点
﹒外壳采用ZL102铝合金压铸成型,表面高压静电喷塑
﹒钢化玻璃罩,具有较强的抗击能力,并有红、黄、蓝、等多种颜色可
供选择
﹒.钢管或电缆布线均可
﹒产品出产铭牌上只体现单元内容,各分单元代号为订货叁数
□Die-casted shell of ZL102 aluminium alloy with high-preessure electrostatic
plastic-sprayed surface.
﹒The enclosure is made of toughened glass with well impulsion- withstanding,
and its color can be freely selected.
﹒Suitable for both steel pipe wiring and cable wiring
﹒Nameplate only indicate the main unit description, the implication of each
unit is ordering information
■执行标准
﹒GB3836.1-2000爆炸性气体环境用电气设备第1部分：通用要求
﹒GB3836.2-2000爆炸性气体环境用电气设备第2部分：隔爆型“d”
﹒GB3836.3-2000爆炸性气体环境用电气设备第3部分：增安型“e”
□Standards
﹒GB3836.1-2000 Electrical apparatus for explosive gas atmosphere-part
1:General request
﹒GB3836.1-2000 Electrical apparatus for explosive gas atmosphere-part
2:Flame-proof enclosure“d”
﹒GB3836.1-2000 Electrical apparatus for explosive gas atmosphere-part
Safety-increased enclosure“e”
■安装、使用与维修
﹒安装前应检查本产品铭牌上所列基本数据是否与实际使用条件相符
﹒产品应可靠接地
﹒无论何种接线须将引入装置密封圈压。
﹒维修时必须切断前级电源后开盖
﹒引入装置密封圈和橡胶垫均采用耐油橡胶3001制造，用户在使用、
维修过程中若发现老化应与制造厂联系定购，并及时更换以确保防
爆性能
﹒在隔爆面上均匀涂以204-1防锈油脂后在投入使用
﹒海拔不超过2000m
﹒周围环境温度为-20～+400C
﹒周围空气相对湿度不大于95%
﹒在无显著摇动和冲出振动的地方
﹒污染等级为3级
﹒无破坏金属和绝缘的腐蚀性气体或蒸汽的地方
﹒与垂直面的安装角度不超过15度
□Installation usage, maintenance.
﹒Check the data before install it.
﹒Product should be link to ground.
﹒Cable should pressurized in to airproof quoit.
﹒cut off power before maintenance.
﹒In-build System and the rubber circle are made of oil-proof 3001, you
should contact our factory if the airproof quoit is damaged.
﹒Mop up 204-4 antirust grease before use it.
﹒The altitude is not over2000m
﹒The environment temperature is-20～+400C
﹒The relative humidity of the air around the equipment is not over95%
﹒No distinct shaking,concussion and libration
﹒The pollution grade is 3
﹒No corrosive gas and steam which can destroy the insulation of the metal
﹒The install angle(to the vertical surface)is not over 150
