点击图片查看大图
提示信息| 类型： | 坚固塑料壳五倍过压法兰压力表 | 联接型式： | G1/2 |
| 型号： | 3100 PÜ / 无充液 | 精度等级： | 1.6 |
| 品牌： | Armaturenbau | 环境温度： | -20-70（℃） |
| 加工定制： | 是 | 公称直径： | 100 160 250（mm） |
| 测量范围： | 0-10 mbar bis 0-40 bar（MPa） |
德国AB PÜ 100-4 2.5bar DIN falnge DN25
塑壳高过压隔膜压力表
Diaphragm Pressure Gauges
Bezel Ring Case Black
NCS 100 (4") 160 (6") 250 (10")
Model PÜ Accuracy Class 1.6
Applications
Pressure gauges with horizontal diaphragm allow to find suitable versions for even difficult kinds of media, such as aggressive, contaminated or viscid media.
Nominal Case Sizes (NCS)
100 mm (4"), 160 mm (6") or 250 mm (10")
Accuracy Class (EN 837-3)
1.6 resp. 2.5 when the diaphragm is supplied with protection foil
Pressure Ranges (EN 837-3)
0-10 mbar resp. 0-4" WC up to 0-40 bar resp. 0-600 psi, with PTFE foil 0-40 mbar resp. 0-16" WC and up also the corresponding vacuum and compound ranges
Pressure Limitations (EN 837-3)
Steady pressure: full scale value
Cyclic pressure: 90% of full scale value
Overpressure: up to 5 times f.s., max. 40 bar (600 psi), resp.
measuring flange Ø160 mm max. 2.5 bar (40 psi)
Protection Type (EN 60 529 / IEC 529)
IP 43
Further information about advantages, applications, specifications, temperature limitations and pressure ranges of diaphragm pressure gauges can be found in our model overview 3000.
Standard Configuration
Connection
Bottom connection G ½ B (½" BSP, standard), ½" NPT or M 20x1.5, if with PTFE lining: inlet orifice Ø 7 mm (.28"); flange connections: see page 2 ff
Movement
Brass/German silver
Dial
Aluminum alloy, black figures, white background
Pointer
Aluminum alloy, black
Case and Ring
NCS 100, 160 (4", 6"): glass fiber reinforced polyamide 6B black,
NCS 250 (10"): aluminum alloy, polyester lacquer grey,
bezel ring carbon steel black
Window
Single strength glass
Measuring Flange Ø
Pressure ranges < 250 mbar (< 100" WC)= Ø 160 mm (6.3"),
pressure ranges > 400 mbar (> 160" WC) = Ø 100 mm (3.94")
Upper Flange
Carbon steel, zinc plated
Wetted Parts
–2 Lower flange: carbon steel, zinc plated
Gasket: NBR
Diaphragm: 10 to 250 mbar: 316 Ti (1.4571)
0.4 to 1.6 bar:Duratherm(=NiCrCo alloy)
2.5 to 40 bar: carbon steel, zinc plated
–3 Lower flange: 316 Ti (1.4571)
Gasket: FPM
Diaphragm: 10 to 250 mbar: 316 Ti (1.4571)
0.4 to 40 bar: Duratherm
–4 Lower flange: carbon steel, zinc plated, PTFE-lined
Gasket: PTFE
Diaphragm: 40 to 250 mbar: 316 Ti (1.4571), PTFE-foil
0.4 to 40 bar: Duratherm, PTFE-foil
–5 Lower flange: 316 Ti (1.4571), PTFE-lined
Gasket: PTFE
Diaphragm: 40 to 250 mbar: 316 Ti (1.4571), PTFE-foil
0.4 to 40 bar: Duratherm, PTFE-foil
Optional Special Configurations
•Inlet port orifice up to Ø 10 mm (.39") for versions –2 or –3
•Other connection flanges upon request (e.g. according to former DIN)
•Diaphragm with protection foil:
PTFE (> 40 mbar, vacuum tight), sealing PTFE;
Fine-silver (> 160 mbar, vacuum tight), sealing FPM;
Tantalum (> 160 mbar, vacuum tight upon request), sealing PFTE;
others upon request
•Other materials for lower measuring flange with process connection upon request
•Upper measuring flange with body 304 stainless steel (1.4301),
or optionally 316 Ti (1.4571)
•Top or side connection, or other than vertical installation position
•Movement stainless steel, wear and corrosion resistant
•Acrylic glass lens or laminated safety glass
•Special scales such as dual ranges, special units, fine-division (with
knife-edge pointer)
•Stationary red pointer on the dial or with external adjustment 1)
•Maximum indicating pointer, external adjustment 1) (for pressure ranges
> 100 mbar resp. > 4" WC)
•Micro-adjustable pointer, mechanism aluminum
•up to 10-times overrange protection, but
max. 40 bar (600 psi) for measuring flange Ø 100 mm (3.94"),
max. 2.5 bar (40 psi) for measuring flange Ø 160 mm (6.3")
•Accuracy class 1.0 or .6 (EN 837-3) upon request
•1" blow-out relief on the back of the case
•Bezel ring chrome plated brass
•Rubber gasket between window and bezel for splash water protection
•NCS 100 (4"): case carbon steel black, model Pl 100
•NCS 160 (6"): case cast iron, model Pn 160
•NCS 100 (4"), 160 (6"): case and upper flange out of one piece cast
iron, models Pm 100, Pm 160
•NCS 160 (6"), 250 (10"): bayonet ring case carbon steel black, upper
flange carbon steel black painted, models PB 160, PB 250, and
PBG 160 (> 160 mbar resp. 60" WC)
•NCS 160 (6") case with cover ring grey cast iron, ring screwed to the
case front, model PC 160
•Electrical accessories, please see data sheets 3190, 9000 ff
1) If adjustable from outside: with acrylic glass window
How to Order:
Model code: PÜ
Nom. case size: 100 (4"), 160 (6") or 250 (10")
Wetted parts: Ordering code –2, –3, –4 or –5 (compare left)
Pressure range: According to EN 837-3 e.g. 0-4 bar or 0-60 psi
Connection: Thread connection G ½ B (½" BSP = standard),
½" NPT, M 20x1.5, others upon request
For flange connection please specify flange type
and size as on tables page 2-4
Special options: (see above)
Examples for Ordering Information:
• PÜ 100–3, 0-60 mbar, G ½ B (½" BSP)
• PÜ 100–4, 0-2.5 bar, DIN flange DN 25
Case Configuration, Flange Connections, Dimensional Data and Weight
北威州的ARMATURENBAUGmbH 是一家拥有长年生产压力测量仪器传统的中型企业，它的前身是1903年成立的位于德国Halle/Saale的 August Beer 公司。大约180员工为了公司的前途不断地努力工作。
MANOTHERMBeierfeld GmbH的前身是撒克逊州的“Meßgerätewerk Beierfeld”。自1957年以来，这里生产工业用压力和温度测量仪器以及气体压力温度计、保护管、接触压力表、真空计，1991年MANOTHERMBeierfeld GmbH 作为 ARMATURENBAU GmbH 的子公司私有化。
MANOTHERMBeierfeld GmbH 客户主要分布在德国东部、东欧、前苏联国家和中国这些地区和国家之中。
我们的产品范围包括高价值的压力表和温度测量仪器，多年来在全球范围内享有极高的声誉。我们能够很自豪地说，客户高度赞誉我们的压力和温度测量仪器的质量和相应的技能以及可靠性。
欢迎致电咨询订购德国AB PÜ 3100 100-4 2.5bar DIN falnge 塑壳高过压隔膜压力表
电话:010-51669912 56291930 15910733293
传真：010-51669912
QQ：823377546 1491421115 2636968574
