发布需求
广东 广州市| 型号：SC10 | 品牌：美国 | 加工定制：否 |
| 测量范围：10 MHz |
SC10是一个高稳定性恒温箱的10 MHz的石英晶体振荡器，结合出色的相位噪声，Allan方差，老化等特点。Using an SC-cut crystal for lowest phase noise characteristics, and an innovative "electronic double oven" temperature controller to minimize temperature gradients, the SC10 achieves a one second Allan variance of 2 &tiMES; 10-12and an aging rate of only 2 × 10-10, making it ideal for virtually any precision timing application.使用SC切割晶体最低相位噪声特性，以及创新的“电子双炉”温度控制器，以减少温度梯度，的SC10达到一秒钟的Allan方差为2&tiMES;10-12和老龄化率只有2×10-10，使它几乎任何精密计时应用的理想选择。
SC10恒温箱晶体振荡器
•SC切割晶体的低相位噪声
•2×10-12Allan方差（1秒）
•低老化（<2×10-10）
•+15或+24VDC操作
•电子分频控制
SC10恒温箱晶体振荡器
SC10是一个高稳定性恒温箱的10MHz的石英晶体振荡器，结合出色的相位噪声，Allan方差，老化等特点。使用SC切割晶体最低相位噪声特性，以及创新的“电子双炉”温度控制器，以减少温度梯度，的SC10达到一秒钟的Allan方差为2×10-12和老龄化率只有2×10-10，使它几乎任何精密计时应用的理想选择。
方便的选择
有很多选项，可以指定SC10的表现，以符合您的要求。15或24VDC操作可以被指定，输出可以用SMA，SMB，SMC连接器，或单个引脚上。老化，噪声，温度稳定性好，工作温度范围都可以单独指定，分为3个等级，所以你只需要支付你所需要的性能。电子微调（EFC）是可与众多的调谐范围和斜坡。
| SC10 Ovenized Crystal Oscillator | ||||||
| Grade Dependent Specifications | ||||||
| J | K | A | ||||
| Frequency | 10 MHz | 10 MHz | 10 MHz | |||
| Aging (per day) | <1 × 10-9 | <5 × 10-10 | <2 × 10-10 | |||
| Allan var. (1s) | <1 × 10-11 | <5 × 10-12 | <2 × 10-12 | |||
| Phase noise (per Hz) | ||||||
| 10 Hz | <-120 dBc | <-125 dBc | <-130 dBc | |||
| 100 Hz | <-150 dBc | <-150 dBc | <-150 dBc | |||
| 1 kHz | <-158 dBc | <-158 dBc | <-158 dBc | |||
| 10 kHz | <-158 dBc | <-158 dBc | <-158 dBc | |||
| Temp. range (°C) | 0 to 50 | -10 to 60 | -20 to 70 | |||
| Temp. stability (0 to 50 °C) | <±2 × 10-9 | <±1 × 10-9 | <±5 × 10-10 | |||
| Power | ||||||
| Warm-up | 8 W | 8 W | 12 W | |||
| 25 °C | 3 W | 3 W | 3 W | |||
| Output | ||||||
| Output level | 1 VRms into 50 Ω (+13 dBm) | |||||
| Output accuracy | ±5 % | |||||
| Output waveform | Sine wave | |||||
| Harmonic distortion | <-60 dBc | |||||
| Tuning | ||||||
| Mech. tuning range | >±3 Hz | |||||
| EFC range and slope | ||||||
| Option 1 | 0 to 10 V, 5 V nominal, +0.5 Hz/V | |||||
| Option 2 | 0 to 10 V, 5 V nominal, -0.5 Hz/V | |||||
| Option 3 | -10 to 10 V, 0 V nominal, +0.25 Hz/V | |||||
| Option 4 | -10 to 10 V, 0 V nominal, -0.25 Hz/V | |||||
| Option 5 | -5 to 5 V, 0 V nominal, +0.5 Hz/V | |||||
| Option 6 | -5 to 5 V, 0 V nominal, -0.5 Hz/V | |||||
| Option 7 | 0 to 6 V, 3 V nominal, +0.75 Hz/V | |||||
| Option 8 | 0 to 6 V, 3 V nominal, -0.75 Hz/V | |||||
| General | ||||||
| Output connector | Pin, SMA, SMB, or SMC | |||||
| Supply voltage | +15 VDC or +24 VDC | |||||
| Size | 2" × 2" × 4" (WHL) | |||||
| Weight | 1 lbs. | |||||
| Warranty | One year parts and labor on defects in materials and workmanship | |||||
| 1. Low power warm-up option is avAIlable. Contact factory for details. 2. Lamp lifetime is the dominant consideration in the design life estimate. The estimate is based on the measured reduction of lamp intensity and the elevation of lamp start voltage with time. | ||||||
免责声明：本文所用视频、图片、文字如涉及作品版权问题，请第一时间告知，我们将根据您提供的证明材料确认版权并立即删除内容。
