发布需求
广东 中山市| 加工定制: | 是 |
| 品牌: | Constantkotewall |
| 型号: | HX027 |
| 防护等级: | IP65 |
| 光源功率: | 1000W |
| 电压: | 220 |
| 主要适用范围: | Crystallamp,thehighlights |
| 特1号: | 50KG |
| 材质: | aluminum |
| 名称: | Lampsandlanternslevelers |
| 产品图片 |
| Product overview A: the product: High a nt of lamps and lanterns is according to GB7000.1-2002 GB/T15497 - safety requirements and experiment of lamps and lanterns 1995 enterprise standard system constitution and the requirements of technical standard system and GB15092.1-2000 appliance switch in the first part: the requirements of general requirement, the development and production of a new generation of apply to the replacement of light source of lamps and lanterns, repAIr electrical mechanical and electrical integration of the lamps and lanterns is lifting gear. 1;Use this device to a higher position of the surface of the lamps and lanterns to work, to replace or repair electrical appliances, after the completion of the lamps and lanterns again automatically to the original height, make its recovery in situ.This device adopts the remote control to lift control of lamps and lanterns, this device is suitable the place: tall, factory workshop, warehouse, sports hall, supermarket, logistics center, aircraft hangars, aircraft maintenance factory building, exhibition hall and so on. 2;Model: HSS - 15 Two: the main performance: 1. The rated supply voltage: 220 v + / - 10% : 2. The rated frequency 50 hz 3. The rated working current: 10 kg in weight lifting gear lOAd, working current of 0.7 or less A Lifting gear load weight 15 kg, the working current of 0.8 or less A 4. Lifting: at an average rate of average rate rise: 0.05 M/S or less Falling average speed: 0.06 M/S or less 5. Lifting height: 20 m (in this BATch of products) Three: introduction of structure 1. High conductive parts of the lamps and lanterns with advanced lighting power supply by the conductive column and the conductive ring close pressure (pressure of 2 kg/m ㎡) state of conduction.Conductive rate was 100%.When the state of separation between the two, lamps and lanterns is in a state without electricity, after finish the homework to in situ, the automatic pressure. 2. The fixed and positioning of lamps and lanterns In situ, lamps and lanterns to guide rod part of the device accurately and automatically into the device guide hole parts, realizes the fixed and positioning, in order to prevent the motion of the lamps and lanterns in the high position, make the lamps and lanterns in the stationary state. 3 high levelers lifting weight series of lamps and lanterns: lifting gear load weight 30 kg; 8 kg, 15 kg,Lift high 4. Lamps and lanterns levelers collision avoidance and high security. High levelers will rise to the original position of lamps and lanterns of lamps and lanterns, by travel switch components, the control circuit power supply will be automatically cut off, conduction lighting power supply automatically. 5. High control part of the lamps and lanterns levelers Lamps and lanterns of high elevator control part is: wireless remote control 4: high elevator installation of lamps and lanterns: Installation: type suction a top riser should be installed vertically. 5: high riser of lamps and lanterns and lamps and lanterns of connection form: 1. The threaded connection 2. The flange connection 3. The hook type even Six: high applicable lamp type lamps and lanterns levelers Lamps and lanterns of high levelers for all kinds of high pressure die casting aluminum molding electric appliance box and cooperate with high purity aluminum reflector lamps and lanterns. Seven: packaging requirements 1. This company produces the elevator will have a second packaging form. The inner packing: plastic bubble Packing: corrugated carton: a case of one 2. The product specification and are in a box the lamps and lanterns. 3. The outer packing has the company on packaging 8: warning: 1. The top riser installation before no electricity! 2. The circuit power wire connect with advanced wire L terminal, zero line N terminal, levelers all wire must be in phase;Elevator control system shall be independent! 3. The elevator must be installed vertically. Logistics/Courier A, before shopping: If you have any question, can at any time consulting, we will be patient answer for you. Second, about the price of the product: Part of the online prices are for reference only, specific price please call consulting the seller. Three, about the logistics: The specific way of logistics and cost is decided by negotiation between the seller and the buyer. contact Contact person: Mr Liu Shibin business manager (sales) Contact address: China guangdong zhongshan zhongshan city.near LeFeng D9 MAO bright lights all the way with city Tel: 0086 0760 0760 Fax number: 0086 0760 23658251 The company's web site: http://www.hengxulighting.com http://hxdspj.cn.alibaba.com Company profile I factory is specializing in the production of lamps and lanterns of industrial and mining lamp, crystal lamp, ZaiChongXing levelers.Is also a factory, stadium lighting, commercial lighting lamps and lanterns, buried lights, underwater lights, garden lights, street lamps, and other products professional production and processing of the individual through the camp, the company is headquartered in guangdong zhongshan city cross bar mau glow lamp with city D 9, I outlets have a complete and scientific quality management system.Our factory and sales department of integrity, strength and product quality obtain industry acceptance.Welcome all the friends come to my factory visit, guidance and business negotiation. |
|
| 联系方式 |
手机：18676011698 |
免责声明：本文所用视频、图片、文字如涉及作品版权问题，请第一时间告知，我们将根据您提供的证明材料确认版权并立即删除内容。
