1．机构Mechanical:

1-1．外观尺寸External dimension

参考附图Refer to drawing

1-2．外观Appearance

目视无披峰、损伤、变形、生锈、油污等不良现象

There shall be no excessive scratches，dents or deformation，when inspected by naked eyes.

1-3．重量Weight

75G/pcs

1-4．轴承Bearing

双滚珠轴承Two balls bearing

2.测定条件Measurement condition

2-1．测试时电机方向                  Direction of D.C motor mounting

主轴水平或垂直方向Horizontal and vertical to output shaft direction

2-2．电源power source

直流电源D.C regulated power source

3．电气特性Electrical characteristics (在通风及额定电压条件下in free AIr at rated voltage)

3-1．额定电压  Rated voltage

12V

3-2．额定电流  Rated current

0.12A（MAX0.14A）空载

3-3．额定输入功率Rated input power

1.44W（MAX1.68W）空载 

3-4．扭力Rated torque

12.8mN·m（1.33g·cm）

4．效率Efficiency

4-1．风扇转数Rated speed

8000±10%RPM   空载  

4-2．最大风量Maximum air flow

0CFM

4-3．最大静压Maximum static air pressure

0inch-H2O

5．特性规格Characteristics

5-1．操作电压Operating voltage range

6V~12V

5-2．起动电压Starting voltage

6V  (ON/OFF)

5-3．锁定电流Locked current

无锁定保护功能

5-4．操作温度Operating temperature

-10℃~+60℃

5-5．储存温度Storage temperature

-30℃~+85℃

5-6．安装方向Direction of motor mounting

轴露垂直任意方向Shall be satisfied at any output shaft direction

5-7．运转方向Directing of  rotation

CCW（出轴面看逆时针运转）

5-7．环境湿度Environment humidity

10%(RH) 45℃for24 hours & 98%(RH)45℃for24 hours

5-8．绝缘阻抗强度Insulation resistance

在本体与两条导线间加500V直流电压之绝缘阻抗在10MΩ以上

At least10MΩ at 500VDC between housing and both leadwires.

5-9．绝缘耐压强度Dielectric strength

必须能抵抗在本体与两线间加500V交流电压1分钟lmA。

Withstand 500 VAC 1 minute 1mA between housing and both lead wires.