Power source: 220-240V/AC 50Hz
100-130V/AC 60Hz
Rated lOAd:1200W Max.tungsten(220-240V/AC)
300W Max.fluorescent(220-240V/AC)
600W Max.tungsten(100-130V/AC)
150W Max.fluorescent(100-130V/AC)
Standby power: working 0.45W (static 0.1W)

Time setting: 10sec-12min
Light-control: 2LUX~2000LUX
Detection range: 1-6m (radii.)
Detection angle: 360º (ceiling installation)
Installation height: 2.5~3.5m
Detection motion speed: 0.6~1.5m/s
Working temperature: -10°C~+40°C

FUNCTION：

You can manually adjust the time setting, Sensitivity and light-control (For detAIl: see 1.knob setting); it is very easy to use.
Install Sensor at 2.5~3.5m position on the wall (For detail: see 3. installation instruction) and connect the wire according to
the 2. connection figure. Switch on power, after about 1 minute the unit enter stable working state. Here please turn TIME
knob to the position close to minimum, and turn LUX to sun for testing. If it works normally, turn the TIME knob to the
minimum” IMPULSE” position( ). When it senses again, the controlled lamp will be turned on and off regularly. If the above
tests go through, then select the time, light-control and sensitivity to your need. So its installation is ok.

免责声明：本文所用视频、图片、文字如涉及作品版权问题，请第一时间告知，我们将根据您提供的证明材料确认版权并立即删除内容。