一、适用范围：

1、爆炸性气体混合物危险场所：1区、2区。
2、爆炸性气体混合物：ⅡA、ⅡB。
3、温度组别：T1～T6。
4、防爆标志：ExdeⅡBT4 ExdⅡBT4 *ExdeⅡCT4

二、产品特点：

1、铸铝合金外壳，表面喷塑。
2、插头的接地触头比主触头长，以保证安全。
3、插销与开关制成联锁结构，只有开关断开后方能拔出插头。

三、主要技术参数

四、主要外形尺寸及安装形式：

五：型号含义：

■订货须知

﹒用户在订货时须注明插销的电流、电压、极数、结构形式

﹒本产品在户外使用时，建议使用防雨罩

Notice if ordering

﹒Please note the current,voltage and structure of plug if ordering.

﹒When the product is used outdoors,please equip rAIn-resistant shade.

■安装、使用与维修

﹒安装前应检查本产品铭牌上所列基本数据是否与实际使用条件相符。

﹒产品应可靠接地。

﹒无论何种接线须将引入装置密封圈压紧。

﹒维修时必须切断前级电源后开盖！

﹒引入装置密封圈和橡胶垫均采用耐油橡胶3001制造，用户在使用、维修过程中若发现老化应与制造厂联系定购，并及时更换以确保防爆性能。

□Installation usage, maintenance.

﹒Check the data before install it.

﹒Product should be link to ground.

﹒Cable should pressurized in to airproof quoit.

﹒cut off power before maintenance.

﹒In-build System and the rubber circle are made of oil-proof 3001, you should contact our factory if the airproof quoit is damaged.

■产品特点

﹒铸铝合金外壳，表面喷塑。

﹒插销与开关制成联锁机构，只有开关断开后方能拔出插头。

﹒适用于额定电压380V或220V、额定电流16A、32A的线路中，作

 为连接手持工具及照明灯电源。铸铝合金外壳，表面喷塑。插座上

 带有分、合指示。插头的接地触头比主触头长，使主触头未接通前

 先将地线接通。在拔脱插头时，最后分断接地线，以保证安全。插

 销与开关制成联锁结构，当插头插入后，插头上的转套向右旋转至

 一定角度。插座内的开关即闭合，同时插销不能拔脱。反之，将转

 套向左旋转一定的角度，则开关分断，然后才能拔掉插头。插座上

设有防护盖，在插头拔脱后，防护盖将插座遮蔽，以免外物侵入。

 铜管或电缆布线，电缆布线须配有电缆夹紧密封接头。本产品符合

 国家GB3836.1.2.3-2000标准设计要求。

□Features
﹒The shell is made of diecasted A1-alloy with plastic-sprayed surface.

﹒The plug together with switch is constructed to form interlocks.Only if

  switch is off,the plug can be drawn out.

﹒Suitable for ateel pipe and cable wiring.

﹒Suitable to connecting portable electrical tool or power source of lighting

  fixture in thos circuits with rated voltage of 380V or 220V and rated

  current of 16A,32A Enclosure is made of casting aluminum alloy,surface is

  sprayed with plastics.With indicater of ON/OFF Earth pin is longer than

  main pin,so,before power on,the earth pin is effected.Pulling out pin,

  the earth pin only could bedisconnected after main pin discontented So the

  plug and socket could be functioned safety.The plug and socket is

  interlocked with switch.when insert plug into socket and right hand rotate

  sleeve arounding plug to certain angle the switch is on and the plug could

  not pullout,if left hand or rotate the sleeve,after the switch is off,the

  plug could be pull out.With guarding cover,After plug pulled out,the cover

  could protect the cover could protect the socket form other articles