96
1. 产品概述/Product Overview
This document presents the generic specification for the 41-channel 100GHz AWG MUX/DEMUX component supplied for use in DWDM system. Flyin’s Dense Wavelength Division Mux/Demultiplexer Modules are part of a series of high performance products based on silica-on-silicon planar technology and a unique athermal packaging design requiring no electrical power, software or temperature control for a completely passive DWDM solution. This product range offers a combination of very low loss and high channel isolation along with long term reliability and low cost per channel for 41 channel, 100GHz solutions. Each module can perform Mux and Demux functions. Different input and output fibers, such as SM fibers, MM fibers and PM fiber can be selected to meet different applications. | Flyin’s label is only for spec review and can be no label or customer label on the device on deliveredproducts. |
2. 极限条件/Absolute Maximum Ratings (unless otherwise specified)
参数/Parameters | 条件/Conditions | 规格/Specifications | 单位/Units | |
最小/Min. | 最大/Max. | |||
工作温度/Operating Temperature | 产品正常工作时/Operating | -5 | 65 | oC |
工作湿度/Operating Humidity | 产品正常工作时/Operating | 5 | 95 | %RH |
存储温度/Storage Temperature | 产品不工作时/Non_Operating | -40 | +85 | oC |
存储湿度/Storage Humidity | 产品不工作时/Non_Operating | 5 | 95 | %RH |
光性能/Optical Specification (高斯AWG/ GaussianAthermal AWG) 参数/Parameters 条件/Condition 规格/Specs 单位/Units Min Typ Max 通道数/Number of Channels 41 通道间距/Number Channel Spacing 100GHz 100 GHz 中心波长/Cha. Center Wavelength ITU频率/ITU frequency. C -band nm 通带频率/Clear Channel Passband ±12.5 GHz 波长精度/Wavelength Stability Maximum range of the wavelength error of all channels and temperatures in average polarization. ±0.05 nm -1 dB 带宽/-1 dB Channel Bandwidth Clear channel bandwidth defined by passband shape. For each channel 0.24 nm -3 dB 带宽/-3 dB Channel Bandwidth Clear channel bandwidth defined by passband shape. For each channel 0.43 nm 插损/Optical Insertion Loss at ITU grid Defined as the minimum transmission at ITU wavelength for all channels. For each channel, at all temperatures and polarizations. 4.5 6.0 dB 相邻通道隔离度/Adjacent Channel Isolation Insertion loss difference from the mean transmission at the ITU grid wavelength to thehighest power, all polarizations, within the ITU band of the adjacent channels. 25 dB 非相邻通道隔离度/Non-Adjacent, Channel Isolation Insertion loss difference from the mean transmission at the ITU grid wavelength to thehighest power, all polarizations, within the ITU band of the nonadjacent channels. 29 dB 总隔离度/Total Channel Isolation Total cumulative insertion loss difference from the mean transmission at the ITU grid wavelength to the highest power, all polarizations, within the ITU band of all other channels, including adjacent channels. 22 dB 插损一致性/Insertion Loss Uniformity Maximum range of the insertion loss variation within ITU across all channels, polarizations and temperatures. 1.5 dB 方向性/ Directivity(Mux Only) Ratio of reflected power out of any channel(other than channel n)to power in from the input channel n 40 dB 插损平坦度/Insertion Loss Ripple Any maxima and any minima of optical loss across ITU band, excluding boundary points, for each channel at each port 1.2 dB 回损/Optical Return loss Input & output ports 40 dB PDL/Polarization Dependent Loss in Clear Channel Band Worst-case value measured in ITU band 0.3 0.5 dB 偏振模式色散/Polarization Mode Dispersion 0.5 ps 最大承受光功率/Maximum Optical Power 23 dBm 功率监控范围/MUX/DEMUX input/ output Monitoring range -35 +23 dBm 1. IL Represents the worst case over a +/-0.01nm window around the ITU wavelength ; 2. PDL was measured on average polarization over a +/- 0.01nm window around the ITU wavelength. 3. 机械尺寸/Mechanical Schematic and Dimensions 尺寸/Dimensions 120 x 75 x 12.7 mm 安装孔/Space between space between screws 110×60 mm 光纤类型/Fiber Type 公共端Common G657A fiber with 900mm loose tube,加900mm 套管,通道端G652DRibbons Channels 光纤编排/Fiber Format 4x 12带纤/4x 12-fiber ribbons 光纤长度/Fiber Length 输入端/Common 500mm ±50mmwith 900um loose tube/输入线长500mm ±50mm带900um套管 输出端/Channels Ribbon250mm±20 mmand Fan out 250mm±30mmwith 900um loose tube /输出带纤250mm±20 mm,加分支器线长250mm±30mm 公共端/Common 颜色/Color 白/white 带纤标识/RibbonIdentification 带纤末端贴数码贴标识 /Label with ribbon number to be placed midway between ribbon end-points 连接器类型/Connector Options Common LC/UPC Channels LC/UPC 带纤光纤标识/Fiber Identification in Ribbon 1 蓝/Blue 2 橙/Orange 3 绿/Green 4 褐/Brown 5 灰/Grey 6 白/White 7 红/Red 8 黑/Black 9 黄/Yellow 10 紫/Purple 11 粉/Pink 12 水/Aqua Fanout *可以按客户要求使用其他结构/Also avAIlable in other configuration 4. 可靠性说明/Reliability Specifications The planar DWDM components described within this datasheet are fully qualified according to Telcordia reliability assurance requirements for fiber optic and opto-electronic components (GR-1221-CORE/UNC, Generic Reliability Assurance Requirements for Fiber Optic Branching Components, and Telcordia TR-NWT-000468, Reliability Assurance Practices for Opto-electronic Devices). The reliability report is available for request. 5. 订购信息/Ordering Part Code Sequence AWG X XX X XXX X X X XX Band Number of Channels Spacing 1st Channel Filter Shape Package Fiber Length In/Out Connector C=C-Band L=L-Band D=C+L-Band X=Customize 16=16-CH 32=32-CH 40=40-CH 48=48-CH XX=Special 1=100G 2=200G 5=50G X=Special C60=C60 H59=H59 C59=C59 H58=H58 XXX=special G=Gaussian B=BrOAd Gaussiar F=Flat Top M=Module R=Rack X=Special 1=0.5m 2=1m 3=1.5m 4=2m 5=2.5m 6=3m S=Specify 0=None 1=FC/APC 2=FC/PC 3=SC/APC 4=SC/PC 5=LC/APC 6=LC/PC 7=ST/UPC S=Specify
免责声明:本文所用视频、图片、文字如涉及作品版权问题,请第一时间告知,我们将根据您提供的证明材料确认版权并立即删除内容。