Multi-Di@g Access J2534 Pass-Thru OBD2 Diagnostic Tool

 产品编码：CTP049

Multi-Di@gAccess J2534 Pass-Thru Device is a VCI (vehicle communication Interface) enabling you to communicate with the ECU's according to the J2534 & J2534-1 specifications.

Beside ECU reprogramming, with the help of Multi-Di@g Office software vehicle diagnostic, mAIntenance and repair operations can be done in just a few clicks without being an electronic expert. More than 45 brands, a lot of new vehicles, a large deepness in diagnostic functions.

Functions:

After selecting the car manufacturer, then you can make the diagnosis for the different menus on offer (depending on cars models):

1.Maintenance

Diagnosis codes from all computers

Reset maintenance interval

Modification of the sewage

Read / erase fault calculators

Maintenance of the particulate filter

2.Air Conditioning

Diagnosis of cooling electronic

Reading settings cooling circuit,

Test servo actuators

3.Pollution control

Diagnosis of the particulate filter

Electronic control of pollutant emissions

Control of the Lambda probe

4.Liaison to the ground

Electronic configuration of the size of tires,

Electronic configuration of tires (winter / summer),

Setting valves tire pressure

Diagnosis and management of shock-driven

Calibration of the sensor angle Driving (initialization of the steering angle)

5.Body

Implementation of safety airbags (lock / unlock)

Reconfiguration of a new calculator Airbag,

Diagnosis of calculators Airbag,

Rain sensor windshield (reading and erasing fault)

Test panel and activators of lights,

Setting Xenon headlights,

Rear radar

6.Post-Equipment

Setting up the radio,

Configuration lOAder CD,

Setting alarms

Configuration of the coupler,

Configuration bicycle loading system

7.Braking

Diagnosis of calculators ABS, ESP.

Diagnosis and unlock electric brakes.

Flush the brake system.

8.Motor

Diagnosis of any calculator injection engine (diesel, gasoline, flexfuel, etc. ..)

Programming of injectors

Electronic configuration of the EGR valve

9.Expert Mode

Diagnosis of advanced computers,

Configuration of comfort functions,

Change the language of the instrument panel,

physical measures (option with a probe - not supplied)

Direct access to all functions of diagnosis.

Language:Bulgarian, Croatian, Czech, Danish, Dutch, English, Finnish, French, German, Hebrew, Hungarian, Italish, Polish, Portuguese, Romanian, Russian, Serbian, Slovenian, Spanish, Swedish, Turkish.

Characters:

Compliant to SAE J2534 & J2534-1

Either RS 232 or USB interfaces to PC

K-Line ISO 9141 (100 mA)

KWP 2000 ISO 14230-4

SAE J1850 PWM

SAE J1850 VPW

CAN 2.0B ISO 11898

CAN ISO 15765-4

SCI SAE J2610

Programmable power supply

On-board memory

Please pay attention Multi-Di@g Access J2534 Pass-Thru OBD2 Device is not good at programming function.And it is not good atJapan cars.

Package list:

1XVCI (Vehicle Communication Interface)

1XDB25 to OBD-2 Male cable

1XOBD2 Male to OBD2 Female cable

1XDIN6 to USB cable

1XDIN6 to DB9F cable

Software display:

FAQ:

Q: Do i need password when using this product?

A: Yes. When you install the software,it will give you a code.Please send this code to chinauobd2@gmail.com we will send you activation code.Please be sure to set the VCI to A070026.

Q: Is that necessay to use that COM cable?

A: It is not necessay to use that COM cable, you can diectly use usb cable to connect.

免责声明：本文所用视频、图片、文字如涉及作品版权问题，请第一时间告知，我们将根据您提供的证明材料确认版权并立即删除内容。